 Download Terbaru | |
| Random Foto | |
| Kalender |
| Mo | Tu | We | Th | Fr | Sa | Su |
|
|
1 |
2 |
3 |
4 |
5 |
| 6 |
7 |
8 |
9 |
10 |
11 |
12 |
| 13 |
14 |
15 |
16 |
17 |
18 |
19 |
| 20 |
21 |
22 |
23 |
24 |
25 |
26 |
| 27 |
28 |
29 |
30 |
31 |
|
|
 Birthday(s):
|
|
Bismillahirrohmaanirrohiim
Jurusan Teknik Mesin merupakan salah satu program Studi Pada Fakultas Teknologi Industri, Universitas Bung Hattta. Jurusan ini memperoleh status terdaftar melalui SK Mendikbud. Tanggal 23 April 1984 No 0200/0/1984. Kemudian status tersebut berubah menjadi diakui pada tanggal 16 Oktober 1992 dengan SK. Mendikbud. No. 439/DIKTI/Kep/92.
Pada tahun 2005 berdasarkan Surat Keputusan Badan Akreditasi Nasional Perguruan Tinggi Departemen Pendidikan dan Kebudayaan No. 07346/Ak-IX-S1-010/UBHTRS/VII/2005 tanggal 07 Juli 2005, Program Studi Teknik Mesin mendapat status terakreditasi dengan peringkat B dan dapat melaksanakan proses belajar mengajar secara mandiri. Dilihat dari tahun didirikan sampai sekarang Jurusan Teknik Mesin memeperlihatkan perkembangan yang cukup nyata baik itu dari jumlah mahasiswa, Staf pengajar tetap, alumni dan lain-lain. Untuk kedepannya Jurusan Teknik Mesin akan mengembangkan diri untuk menyonsong AFTA 2010..
|
| Latest Active Forum Threads |
| ICITA 2009 |  The 6th International Conference on Information Technology and Applications (ICITA 2009) will be held in Hanoi, Vietnam on 9 - 12 November 2009. The conference is an annual event and is recognized as one of the major series of conferences in Information Technology (IT in short). ICITA continues to retain its tradition of high quality conference and will open up an opportunity for academics and industrial professionals worldwide to exchange their knowledge of the state-of-the-art research and development in information technology and applications, and to establish and extend professional networks. This conference addresses the importance that IT professionals stretch across narrowly defined subject areas and constantly acquire a global technical and social perspective. ICITA 2009 has offered such an opportunity to facilitate cross-disciplinary and social gatherings. Information Technology is considered by the Government of Vietnam as one of the most important driving forces for economic development and social advancement. It strengthens the country’s material, intellectual and spiritual growth, promotes the reform process, speeds up the modernization of economic sectors, and empowers the competitiveness of businesses. Four strategic thrusts of IT development are defined as Infrastructure, Industry, Application (IT use), and Human resource. (by Mr. Nguyen Trong Duong) Over the past years, ICITA has been proudly sponsored by: IEEE NSW Section, IEEE Computer Society, the Univeristy of Technology Sydney, Australia; Charles Sturt University, Australia; Heilongjiang University, China, Jiao-tong University, China, ACM SIG CHI Singapore and Society of Industry Technology. For the ICITA 2009, we gladly welcome the Bac Ha International University, Vietnam and the Vietnam Radio and Electronic Association to join others to be the sponsors of this event.
Informasi lebih lengkap :
http://www.icita.org
|
| |
|
|
| Pelatihan Pengolahan Data (SPSS, AMOS, LISREL dan PLS) |  Dalam penelitian yang bersifat kuantitatif, peran statistika hampir mutlak diperlukan, utamanya dalam penelitian yang berbentuk survei dan Melakukan pengolahan data dengan metode statistika yang lebih canggih, seperti regresi berganda, regresi berganda dengan memasukkan dummy variable, analisis jalur (path analysis), analisis faktor (factor analysis), analisis diskriminan (discriminant analysis). Karena itulah diperlukan manajemen data. Pada saat belajar Statistika seringkali kita kurang mengkaitkannya dengan penerapannya dalam penelitian baik untuk menyusun laporan penelitian, skripsi, tesis, maupun disertasi. Oleh sebab itu, tak jarang kita mengalami kesulitan saat ingin mengolah data penelitian. Kesulitan lain yang sering dialami juga adalah saat kita ingin mengolah data dengan program SPSS, Amos. Lisrel dan PLS. Secara umum pelatihan ini dirancang agar peserta pelatihan mampu menggunakan program kemasan SPSS, Amos. Lisrel dan PLS untuk mengolah data penelitian. Peserta pelatihan diberi kesempatan melakukan pengolahan data (latihan kasus) sehingga dapat menerapkan pengetahuan yang telah diperoleh selama pelatihan. Dengan demikian, peserta pelatihan memiliki pengalaman mengolah data sesuai dengan tujuan penelitian yang hendak dicapai.
Nara Sumber : Prof. Dr. H. Imam Ghozali, M. Com., Akt (UNDIP)
Materi :
- Melakukan pengolahan data dengan metode-metode statistika dasar baik deskriptif (antara lain tabel frekuensi, tabulasi silang) maupun induktif (baik parametrik, seperti uji beda rata-rata, oneway anova, korelasi, dan regresi; maupun nonparametrik, seperti uji beda rata-rata peringkat).
- Melakukan pengolahan data dengan memasukkan variabel kontrol.
- Melakukan pengolahan data dengan metode statistika yang lebih canggih, seperti regresi berganda, regresi berganda dengan memasukkan dummy variable, analisis jalur (path analysis), analisis faktor (factor analysis), analisis diskriminan (discriminant analysis).
- Sistem Persamaan Simultan Analisis Path
- Confirmatory Factor Analysis dan Principal Component Analysis (measurement model), pengujian reliabilitas dan validitas instrumen penelitian
- Structural Equation Modeling
- Lisrel 8.8
- Partial Least Square
- Aplikasi SPSS, AMOS, Lisrel dan Smart PLS (Lab. Komputer)
Informasi Lebih lanjut : Leaflet1 dan Leaflet2
|
| |
|
|
| INTERNATIONAL CONFERENCE ON MATERIALS | Nowadays materials and metallurgical technologies have developed very fast and wide, not only in the metal production field, but also in the other fields such as medical application, electronic, chemical industry, and material manufacture. Many researches have been carried out and resulted in new material and technology, which have been applied in industries. To share ideas and to build mutual cooperation among lecturers, students, researchers, and corporate members� in materials and metallurgical science and technology, we proudly present:
The topics to be discussed:
1. Metallurgical manufacture
2. Materials design and innovation
3. Corrosion and materials failure analysis
4. Materials applications: ceramics, polymer, composite
5. Biomedical material
6. Nano material
7. Materials modeling and simulation
8. Materials characterization
Important Dates:
Extended abstract submission deadline (May 1, 2009)
Registration for oral presentation and poster deadline (May 1, 2009)
Accepted papers announcement (May 15, 2009)
Full paper submission deadline (May 29, 2009)
Advance registration deadline (May 29, 2009)
Registration for passive participant deadline (June 12, 2009)
Informasi lebih lengkap :
http://www.icommet-09.its.ac.id/
|
| |
|
|
|
| Login |
Not a member yet? Click here to register.
Forgotten your password? Request a new one here.
|
| Users Online |  Guests Online: 1
No Members Online
Registered Members: 202
Newest Member: endry
|
| Member Poll | | There is no content for this panel yet
|
|
